GL series diaphragm compressor
GL SERIES DIAPHRAGM COMPRESSOR-REFERENCE PICTURE
The Diaphragm Compressor is a positive displacement compressor with a special structure. It is the highest level compression method in the gas compression field. This compression method has no secondary pollution and has very good protection for the compressed gas. It has a large compression ratio, has good sealing performance, and the compressed gas is not polluted by lubricating oil and other solid impurities. Therefore, it is suitable for compressing high-purity, rare and precious, flammable, explosive, toxic and harmful, corrosive, and high-pressure gases. This compression method is usually designated internationally to compress high-purity gases, flammable and explosive gases, toxic gases, and oxygen. and many more.
A. Classified by structure:
Diaphragm compressors have four main types: Z, V, D, L, etc.;
B. Classified by diaphragm material:
Diaphragm materials of diaphragm compressors are metal diaphragm (including black metal and non-ferrous metal) and non-metal diaphragms;
C. Classified by compressed media:
It can compress rare and precious gases, flammable and explosive gases, high-purity gases, corrosive gases, etc.
D. Classified by sports organization:
Crankshaft connecting rod, crank slider, etc.;
E. Classified by cooling method:
Water cooling, oil cooling, rear air cooling, natural cooling, etc.;
F. Classified by lubrication method:
Pressure lubrication, splash lubrication, external forced lubrication, etc.
GL series diaphragm compressor :
Structure type : L type
Piston Travel : 110-180mm
Max Piston force : 20KN-90KN
Max discharge Pressure : 100MPa
Flow Rate Range :10-1000Nm3/h
Motor Power : 7.5KW-90KW
The compressor is consists of a three pieces of diaphragms. The diaphragm is clamped along the surrounding area by the hydraulic oil side and the process gas side of the process. The diaphragm is driven by the hydraulic driver in the film head to achieve the compression and transportation of the gas. The main body of the diaphragm compressor consists of two systems: the hydraulic oil system and the gas compression system, and the metal membrane separates these two systems.
Basically, the structure of the diaphragm compressor is divided into two parts: the hydraulic framework and the pneumatic force framework. During the compression process, there are two steps: the suction stroke and the delivery stroke.
GL SERIES DIAPHRAGM COMPRESSOR-PARAMETER TABLE
| GL series diaphragm compressor parameter table | ||||||||
| Model | Cooling water (L/h) | Flow (Nm³/h) | Inlet pressure (MPa) | Outlet pressure (MPa) | Dimensions L×W×H(mm) | Weight (kg) | Motor Power (kW) | |
| 1 | GL-10/160 | 1000 | 10 | Atmospheric | 16 | 2200×1200×1300 | 1600 | 7.5 |
| 2 | GL-25/15 | 1000 | 25 | Atmospheric | 1.5 | 2200×1200×1300 | 1600 | 7.5 |
| 3 | GL-20/12-160 | 1000 | 20 | 1.2 | 16 | 2200×1200×1300 | 1600 | 7.5 |
| 4 | GL-70/5-35 | 1500 | 70 | 0.5 | 3.5 | 2000×1000×1200 | 1600 | 15 |
| 5 | GL-20/10-150 | 1500 | 20 | 1.0 | 15 | 2200×1200×1300 | 1600 | 15 |
| 6 | GL-25/5-150 | 1500 | 25 | 0.5 | 15 | 2200×1200×1300 | 1600 | 15 |
| 7 | GL-45/5-150 | 2000 | 45 | 0.5 | 15 | 2600×1300×1300 | 1900 | 18.5 |
| 8 | GL-30/10-150 | 1500 | 30 | 1.0 | 15 | 2300×1300×1300 | 1700 | 11 |
| 9 | GL-30/5-160 | 2000 | 30 | 0.5 | 16 | 2800×1300×1200 | 2000 | 18.5 |
| 10 | GL-80/0.05-4 | 4500 | 80 | 0.005 | 0.4 | 3500×1600×2100 | 4500 | 37 |
| 11 | GL-110/5-25 | 1400 | 110 | 0.5 | 2.5 | 2800×1800×2000 | 3600 | 22 |
| 12 | GL-150/0.3-5 | 1100 | 150 | 0.03 | 0.5 | 3230×1770×2200 | 4200 | 18.5 |
| 13 | GL-110/10-200 | 2100 | 110 | 1 | 20 | 2900×2000×1700 | 4000 | 30 |
| 14 | GL-170/2.5-18 | 1600 | 170 | 0.25 | 1.8 | 2900×2000×1700 | 4000 | 22 |
| 15 | GL-400/20-50 | 2200 | 400 | 2.0 | 5.0 | 4000×2500×2200 | 4500 | 30 |
| 16 | GL-40/100 | 3000 | 40 | 0.0 | 10 | 3700×1750×2000 | 3800 | 30 |
| 17 | GL-900/300-500 | 3000 | 900 | 30 | 50 | 3500×2350×2300 | 3500 | 55 |
| 18 | GL-100/3-200 | 3500 | 100 | 0.3 | 20 | 3700×1750×2150 | 5200 | 55 |
| 19 | GL-48/140 | 3000 | 48 | 0.0 | 14 | 3800×1750×2100 | 5700 | 37 |
| 20 | GL-200/6-60 | 3000 | 200 | 0.6 | 6.0 | 3800×1750×2100 | 5000 | 45 |
| 21 | GL-140/6-200 | 5000 | 140 | 0.6 | 20.0 | 3500×1380×2350 | 4500 | 55 |
| 22 | GL-900/10-15 | 2500 | 900 | 1.0 | 1.5 | 3670×2100×2300 | 6500 | 37 |
| 23 | GL-770/6-20 | 4500 | 770 | 0.6 | 2.0 | 4200×2100×2400 | 7600 | 55 |
| 24 | GL-90/4-220 | 6000 | 90 | 0.4 | 22.0 | 3500×2100×2400 | 7000 | 45 |
| 25 | GL-1900/21-30 | 3800 | 1800 | 2.1 | 3.0 | 3700×2000×2400 | 7000 | 55 |
| 26 | GL-300/20-200 | 4200 | 300 | 2.0 | 20.0 | 3670×2100×2300 | 6500 | 45 |
| 27 | GL-200/15-200 | 4000 | 200 | 1.5 | 20.0 | 3500×2100×2300 | 6000 | 45 |
| 28 | GL-330/8-30 | 5000 | 330 | 0.8 | 3.0 | 3570×1600×2200 | 4000 | 45 |
| 29 | GL-150/6-200 | 5000 | 150 | 0.6 | 20.0 | 3500×1600×2100 | 3800 | 55 |
| 30 | GL-300/6-25 | 4500 | 300 | 0.6 | 2.5 | 3450×1600×2100 | 4000 | 45 |
SUBMIT INQUIRY PARAMETERS
Customized is accepted , Pls provide the following information to us :
1.Flow rate: _______Nm3/h
2.Gas Media : ______ Hydrogen or Natural Gas or Oxygen or other gas ?
3.Inlet pressure: ___bar(g)
4.Inlet temperature:_____℃
5.Outlet pressure：____bar(g)
6.Outlet temperature:____℃
7.Installation location: _____indoor or outdoor?
8.Location ambient temperature: ____℃
9.Power supply: _V/ _Hz/ _3Ph?
10.Cooling method for gas: air cooling or water cooing?
Wide variety and types of diaphragm compressor can be manufactured by our company such as hydrogen compressor , nitrogen compressor , helium compressor , natural gas compressor and etc .
Outlet pressure at 50bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi) and other pressure can be customized .
