HC-W400Z Hot Sale 400L High Pressure Filling Bottle for Diving Breathing Food Grade Air Compressor for Fire Fighting

1、 Product name

HC-W400Z  Respirator air pump (high pressure air compressor)

2、Product Image

  3、Main  parameters

Model： HC-W400Z(PLC Control System)

Work pressure： 30Mpa  Mpa(300bar)

 Displacement (inhalation state)： 400L/min  L/min

Type：W-type layout-three-cylinder three-stage reciprocating piston compression

Drive：Electric 380V/50Hz/7.5kw

 Lubrication method：Splash lubrication (food grade lubricant 750-H2)

 Cooling method：Air-cooled

Control mode：Automatic start and stop, automatic sewage discharge, temperature control system, phase sequence protection function, emergency stop function, low noise,Low temperature, low speed, touch screen

Clean air：1 air filtration, 2 oil-water separation, 2 grade classification air purification

Safety devices： Interval safety valve, pressure maintaining valve, automatic shutdown system, box-type protective cover

 Packing size (length×width×height)： 76×110×140cm

 Weight： 290kg

Inflation speed：6 liter bottle filled with 30Mpa about 5.5 minutes

   Certified product： CE certification, MA test report

  Packing List：Instruction manual, safety inspection report certificate, 2 sets of inflation hoses and joints, and the machine has built-in food grade lubricants slip.

4、Working  principle

This product adopts three-cylinder three-stage compression, splash lubrication, inter-stage safety valve and filter system. HC-W400 can provide safe compressed air for any industry that requires high-pressure pure air source, and provide safe compressed air that meets the requirements of human breathing. This product is designed, produced and tested and accepted in accordance with the requirements of GB/T 12929-2008 "Marine High Pressure Piston Air Compressor"; the air quality complies with EN12021 international breathing compressor breathing standard; HC-W400 is a kind of air compression equipment, it will be free 1 kg (1bar/0.1Mpa) of air in the state is compressed to a high pressure gas of 300 kg (300bar/30Mpa) gauge pressure step by step. After the air flows through the separator and filter in the unit, it is removed from the The oil and impurities in the high-pressure air can filter the inhaled air containing fine particulate matter (PM2.5) to a safety value of less than 10 micrograms, which meets the standards set by the World Health Organization, making the exhaust gas clean and tasteless. The personnel provide highly purified, clean, odorless, safe and reliable compressed breathing air.

5、Product composition and characteristics

    Standardized assembly-mass production

The machine is equipped with an automatic shutdown device, the shutdown pressure can be set freely, and it is equipped with a time running timer to support the maintenance time;

2 gas cylinders can be filled at the same time; (1 bottle is recommended, the charging speed is faster)

High-power all-copper core wire customized motor, stable power output, light starting load;

The protective cover adopts plastic spraying process, which is not easy to scratch and rust; (some manufacturers use spray paint, which is low cost and easy to fall off and rust)

Super strong triangle belt, strong tension, and wear-resisting and high-temperature resistance;

Shockproof pressure gauge 0～5800psi/400bar, accurate pressure value;

The reinforced steel plate base is equipped with anti-vibration pads, so the equipment runs more smoothly;

High-strength nylon cooling fan, better heat dissipation effect;

The low pressure adopts red copper tube, which has better heat dissipation performance, and the high pressure adopts stainless steel tube to ensure the safety of output pressure;

The rotating parts are equipped with protective cover devices, and safety valves and automatic shutdown systems are installed at all levels to ensure the safety of operators; motor drive or gasoline engine drive can be selected to meet the air supply requirements under various conditions;

Configure precision air filter (customized wire mesh filter element);

2-stage oil-water separator (standard with manual blowdown, optional automatic blowdown) Final classification air purification system (standard with manual blowdown, optional automatic blowdown) Two-stage purification, first deodorizes water, then deodorizes; (most manufacturers Adopt 1 level mixed filtration to save production cost)

The last stage adopts the piston ring process, and only the piston ring needs to be replaced if worn; (most manufacturers do not use the last stage piston ring process, after the wear, a complete set of pistons and cylinders need to be replaced, and expensive accessories are required)

The end uses a pressure maintenance valve, deep air filtration, and prolongs the life of the filter element, and uses an alloy aluminum permanent filter element, replaceable filter element material, saving later use costs; (some manufacturers have no pressure maintenance valve and use disposable filtration Core, save production cost, increase later use cost)

The parts in contact with gas, such as cylinders and filter cartridges, are cleaned with alcohol before leaving the factory, and tested with food-grade lubricating oil, and they are all debugged before leaving the factory.